EPA/DEP Toxicity Characteristic Table (TCLP)
Maximum Concentration of Contaminants for Toxicity Characteristics
EPA HW No. |
Contaminant |
CAS No.2 |
Regulatory Level |
| D004 | Arsenic | 7440-38-2 | 5.0 |
| D005 | Barium | 7440-39-3 | 100.0 |
| D018 | Benzene | 71-43-2 | 0.5 |
| D006 | Cadmium | 7440-43-9 | 1.0 |
| D019 | Carbon tetrachloride | 56-23-5 | 0.5 |
| D020 | Chlordane | 57-74-9 | 0.03 |
| D021 | Chlorobenzene | 106-90-7 | 100.0 |
| D022 | Chloroform | 67-66-3 | 6.0 |
| D007 | Chromium | 7440-47-3 | 5.0 |
| D023 | o-Cresol | 95-48-7 | 200.0 |
| D024 | m-Cresol | 108-39-4 | 200.0 |
| D025 | p-Cresol | 106-44-5 | 200.0 |
| D026 | Cresol | ---------- | 200.0 |
| D016 | 2, 4-D | 94-75-7 | 10.0 |
| D027 | 1, 4 Dichlorobenzene | 106-46-7 | 7.5 |
| D028 | 1, 2 Dichloroethane | 107-06-2 | 0.5 |
| D029 | 1, I Dichloroethylene | 75-35-40 | 0.7 |
| D030 | 2,4 Dinitrotoluene | 121-14-2 | 0.13 |
| D012 | Endrin | 72-20-8 | 0.02 |
| D031 | Heptachlor (and its epoxide) | 76-44-8 | 0.008 |
| D032 | Hexachlorobenzene | 118-74-1 | 0.13 |
| D033 | Hexachlorobutadiene | 87-68-3 | 0.5 |
| D034 | Hexachloroethane | 67-72-1 | 3.0 |
| D008 | Lead | 7439-92-1 | 5.0 |
| D013 | Lindane | 58-89-9 | 0.4 |
| D009 | Mercury | 7439-97-6 | 0.2 |
| D014 | Methoxychlor | 72-43-5 | 10.0 |
| D035 | Methyl ethyl ketone | 78-93-3 | 200.0 |
| D036 | Nitrobenzene | 98-95-3 | 2.0 |
| D037 | Pentachlorophenol | 87-86-5 | 100.0 |
| D038 | Pyridine | 110-86-1 | 5.0 |
| D010 | Selenium | 7782-49-2 | 1.0 |
| D011 | Silver | 7440-22-4 | 5.0 |
| D039 | Tetrachloroethylene | 127-18-4 | 0.7 |
| D015 | Toxaphene | 8001-35-2 | 0.5 |
| D040 | Trichloroethylene | 79-01-6 | 0.5 |
| D041 | 2, 4, 5-Trichlorophenol | 95-95-4 | 400.0 |
| D042 | 2, 4, 6-Trichlorophenol | 88-06-2 | 2.0 |
| D017 | 2, 4, 5-TP (Silvex) | 93-72-1 | 1.0 |
| D043 | Vinyl chloride | 75-01-4 | 0.2 |
1) Hazardous Waste Number 2) Chemical abstracts service number 3) Quantitation limit is greater than the calculated regulatory level. The quantitation limit becomes the regulatory level. 4) If o-, m-, p-Cresol concentration cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/l. |
|||
